I just picked up a WET11 and spent the better part of the day trying to get it to work on an airport basestation network. I connected it to a imac in bridge mode and after entering the settings (as infrastructure mode) it was able to scan my network and seems to have connected to the network as evidenced by the green wan light.

I can't however see anything on the network from the imac. No fileserver connections, no internet connection via gateway router etc.

I called linksys tech support and they are clueless, unfortunately not knowing anything about apple airport networks. I did flash the firmware to 1.3.2 but have not had the chance to see if this has solved the problem.

Any ideas would be very appreciated.

thanks