WAP11 v2.2 can't do this?

Article:		WAP11 to WET11: Easy, Cheap Wireless Bridging
Subject:		WAP11 v2.2 can't do this?
Date:		2002-09-12 20:33:45
From:		eggboard
Response to: WAP11 v2.2 can't do this?
It is confusing because its intent is to bridge a single MAC address as a single-user client adapter. The WAP11 is really an AP, a network-bridge (when paired with another WAP11 or a similarly firmware equipped unit), or a single-unit Ethernet-to-wireless adapter. The documentation seems to imply that you can bridge traffic from multiple devices to a single wireless AP, but in practice, I don't believe this works. I just purchased a v2.2 WAP11 and so will try it out as part of an update to the article above that I'm working on. I'll also be talking to the Linksys product manager and will clarify this issue. The WET11 uses a somewhat slicker approach, including the Web interface, and appears to be translating the MAC addresses of devices attached to it through an Ethernet hub into a single MAC address that it creates a client association over to an AP.

Showing messages 1 through 1 of 1.

Yes, the WAP11 v2.2 can do this
2002-09-13 22:04:14 eggboard [Reply | View]

I'm hearing from more and more people who have managed to get the WAP11 v2.2 to act as a bridge, and I'll be following up on this. The WAP11's initial release, which I wrote about last year, didn't work in this mode, and I've missed this development. I have both version 1.4 and 2.2 firmware WAP11's and will be testing them (and monitoring their traffic) alongside a WET11 in the near future for a future article.