Airport Extreme wouldn't work either way (broadcomm chipset, closed driver) not sure of the bluetooth module.

here lspci:

0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP

0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI

0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O

0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB

0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB

0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB

0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)

0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)

0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)

0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI

0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100

0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)

0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)

and as much dmesg as I could get (my pc usb keyboard was generating a lot of usb errors)

red new driver catc

drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver

usbcore: registered new driver kaweth

drivers/usb/net/pegasus.c: v0.5.12 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver

usbcore: registered new driver pegasus

drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.1 (2004/03/13)

usbcore: registered new driver rtl8150

usbcore: registered new driver usbnet

usbcore: registered new driver usblcd

drivers/usb/misc/usblcd.c: USBLCD Driver Version 1.04 (C) Adams IT Services http://www.usblcd.de

drivers/usb/misc/usblcd.c: USBLCD support registered.

usbcore: registered new driver usbled

i2c /dev entries driver

Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits

Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits

md: linear personality registered as nr 1

md: raid0 personality registered as nr 2

md: raid1 personality registered as nr 3

md: raid10 personality registered as nr 9

md: raid5 personality registered as nr 4

raid5: measuring checksumming speed

   8regs     :  1116.000 MB/sec

   8regs_prefetch:  1064.000 MB/sec

   32regs    :  1312.000 MB/sec

   32regs_prefetch:  1236.000 MB/sec

raid5: using function: 32regs (1312.000 MB/sec)

raid6: int32x1    390 MB/s

raid6: int32x2    535 MB/s

raid6: int32x4    707 MB/s

raid6: int32x8    394 MB/s

raid6: using algorithm int32x4 (707 MB/s)

md: raid6 personality registered as nr 8

md: multipath personality registered as nr 7

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com

Bluetooth: HCI USB driver ver 2.7

usbcore: registered new driver hci_usb

Bluetooth: VHCI driver ver 1.1

Bluetooth: HCI UART driver ver 2.1

Bluetooth: HCI H4 protocol initialized

Bluetooth: HCI BCSP protocol initialized

Bluetooth: Broadcom Blutonium firmware driver ver 1.0

usbcore: registered new driver bcm203x

Bluetooth: BlueFRITZ! USB driver ver 1.1

usbcore: registered new driver bfusb

NET: Registered protocol family 2

IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP: Hash tables configured (established 16384 bind 16384)

NET: Registered protocol family 1

NET: Registered protocol family 10

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

NET: Registered protocol family 5

Bluetooth: L2CAP ver 2.4

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO (Voice Link) ver 0.3

Bluetooth: SCO socket layer initialized

Bluetooth: RFCOMM ver 1.3

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: BNEP (Ethernet Emulation) ver 1.2

Bluetooth: BNEP filters: protocol multicast

Bluetooth: HIDP (Human Interface Emulation) ver 1.0

ohci_hcd 0001:10:1b.1: wakeup

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Mounted devfs on /dev

Freeing unused kernel memory: 232k init 4k chrp 32k prep

usb 3-1: new low speed USB device using address 2

evbug.c: Connected device: "  USB Keyboard", usb-0001:10:1b.0-1/input0

input: USB HID v1.00 Keyboard [  USB Keyboard] on usb-0001:10:1b.0-1

usb 4-1: new low speed USB device using address 2

evbug.c: Connected device: "Logitech USB Receiver", usb-0001:10:1b.1-1/input0

input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0001:10:1b.1-1

evbug.c: Event. Dev: usb-0001:10:1b.1-1/input0, Type: 2, Code: 0, Value: -12

evbug.c: Event. Dev: usb-0001:10:1b.1-1/input0, Type: 0, Code: 0, Value: 0

ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000d93fffe4ac954]

ISO 9660 Extensions: Microsoft Joliet Level 3

ISO 9660 Extensions: RRIP_1991A

currently running 2.6.10r10 gentoo and accelerated X11, booted gentoo 2004.3 Install CD and G4 kernel just fine.