Article:		WAP11 to WET11: Easy, Cheap Wireless Bridging
Subject:		wet 11 useless
Date:		2002-11-07 22:05:17
From:		anonymous2
I have an airport base station, a wet11, a mac G4 with 9.2, a w2k laptop, and a powerpc 7500,os 8.2, with ethernet port. The wet11 links to the airport (i can see it pulling an ip address in the config from the air port) but only works (internet, network functions) when attached to a PC. When connected to the apple it does nothing, in fact the apple does not even pull an ip from the dhcp, if the cable going in to the wet is plugged into the base station it works fine. Any ideas....help

Showing messages 1 through 3 of 3.

• wet 11 useless
  2003-09-06 05:38:18  anonymous2 [View]
  
  
  I had the same problem with an IBM Think Pad. The Think Pad simply would not see the WET11, and the lan LED would not light on the WET 11 when connected to the Think Pad. If I hooked the WET 11 to a switch and then connected the Think Pad to the same switch, "bingo" the two would see each other and work fine, but hooked directly together... nothing. I had four WET 11's and they all displayed the same problem. Through a switch they would work fine. Connected directly with the laptop they wouldn't. I was beginning to think I had a voltage problem between the laptop and the WET 11 that the switch was compensating for, but I was wrong. I finally solved the problem by uninstalling my ethernet card and reinstalling it. After that everything worked without having to use a switch as an intermediary. Go figure!

• wet 11 useless
  2003-04-02 11:36:57  anonymous2 [View]
  
  
  dump the Mac
• wet 11 useless
  2003-11-23 16:31:58  anonymous2 [View]
  
  
  no just configure you ip addy manually to the WET 11's ip addy.